H7 Morimoto 2Stroke 3.0 Plug And Play LED Bulbs Authorized Dealer

H7 Morimoto 2Stroke 3.0 Plug And Play LED Bulbs Authorized Dealer
H7 Morimoto 2Stroke 3.0 Plug And Play LED Bulbs Authorized Dealer
H7 Morimoto 2Stroke 3.0 Plug And Play LED Bulbs Authorized Dealer
H7 Morimoto 2Stroke 3.0 Plug And Play LED Bulbs Authorized Dealer
H7 Morimoto 2Stroke 3.0 Plug And Play LED Bulbs Authorized Dealer
H7 Morimoto 2Stroke 3.0 Plug And Play LED Bulbs Authorized Dealer
H7 Morimoto 2Stroke 3.0 Plug And Play LED Bulbs Authorized Dealer

H7 Morimoto 2Stroke 3.0 Plug And Play LED Bulbs Authorized Dealer
Shop with confidence by purchasing from the largest Morimoto distributor! If you have any issues we offer quick support. If you have a question please let us know! More importantly if you have ANY questions on the compatibility of these bulbs with your model, it's important we know what you are using it as optional anti-flicker modules may be required. The advanced PCB technology at the core of the 2Stroke 3.0 sets a new industry benchmark emission surface interval of just 2mm total. The PCB core itself is just 1.0mm thick. The circuit pattern: 140um, and the Osram Oslon HKL351. Paired with the 1.03 x 4.33mm light-emitting surface area of the LEDs: this adds up to a total cubic volume of 4.46mm. At the end of the day, no LED bulb in the world more closely simulates the filament size of an incandescent bulb more accurately than the Morimoto 2Stroke 3.0 and for those in the know, this is critical when it comes to proper beam distribution.

Each size in the 2Stroke 3.0 lineup has been painstakingly optimized for proper output in its designated application. The critical reference distance has been calculated based on the geometry of the bulb base and the footprint of the Osram HKL emitter. To ensure consistency, special tools were designed to quality-control the accuracy of each bulb as it comes off the production line.

Most other LED fog light bulbs on the market use a a set it and forget it reference distance across all sizes in the series, which is not the case here. The 2Stroke 3.0 LED bulbs feature a fully adjustable base. In order to fully utilize the optical facets in any reflector or projector: The light emitting diodes must face the 3-o-clock and 9-o-clock positions. Since no single standard exists across different headlight and fog light assemblies, all bulbs in the 2Stroke 3.0 range are fully adjustable.

A geared step rotational adjuster mechanism is installed for all bulbs which twist-to-lock, offering adjustability in 15-degree intervals. An omni-adjustable rotation mechanism is utilized on all bulbs that are press-fit or clip into the housing. Once the bulb is installed, the high-speed fan contained within is completely sealed, making the 2Stroke 3.0 the first actively cooled LED bulb with a fan thatís not susceptible to outside elements. Their unique internal circulation cooling system uses a 12,000-rpm cyclone fan to suck cool air into the body of the bulb and blow warm air out, back into the housing.

This effectively cools the bulb while warming the ambient temperature inside of the housing, increasing resistance to snow/ice buildup on the lens during the winter months. The cooling system on the 2Stroke 3.0 not only does it's job to protect the longevity of the bulb, but serves up a bad-weather benefit not found elsewhere. The LED Driver is configured to accept a wide range of input voltage, making them compatible with low voltage daytime running lights commonly found on modern vehicles.

When the LED driver detects 6-9V of input: The system logic automatically switches to produce just 30% of the standard output. The low power drive rate of 250mA produces only 460lm per emitter and enables the 2Stroke 3.0 to produce a suitably low output volume as a daytime running light. In this mode, the cooling fan also shuts off to conserve power/lifespan.

For vehicles with a PWM-based DRL signal, an inline PWM module that produces a clean DC6V will be required. The driver is completely potted, making it completely weather-proof. Note that the DRL-Drive function is only for use in non-US markets. DRL Drive Input Range: 6-9V. DRL Drive Input Range: 250mA. LED Chips: Osram Oslon Black Flat S KW HKL531. LED Bulbs: 2x Morimoto 2Stroke 3.0 (H7). LED Drivers: 2x Morimoto 2S3 w/ DRL Drivers. Wiring: H7 Plug n Play Inputs. The item "H7 Morimoto 2Stroke 3.0 Plug And Play LED Bulbs Authorized Dealer" is in sale since Tuesday, November 24, 2020. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Lighting & Lamps\Light Bulbs\LED Lights". The seller is "lightwerkz" and is located in Oakland, New Jersey.

This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.


H7 Morimoto 2Stroke 3.0 Plug And Play LED Bulbs Authorized Dealer