CREE H1 LED HEADLIGHT BULBS CONVERSION KIT Replace High Beam, Low Beam, Fog Light 60w/set, 7200lm/set, CREE led chips. V16 TURBO LED: Top Cree LED chips. 30w/40w per bulb to save power. High luminous efficacy Flux Up to 7200LM per pair. 200% brighter than your stock Halogen headlights.The latest technology to ensure a perfect beam pattern without any dark spots. QUICK HEAT DISSIPATION: Whole aluminum housing 7,000 RPM Powerful TurboCool fan to achieve Fast and Efficient Cooling, ensures your LED Headlight bulbs work long time. EASY INSTALLATION: No relay, No capacitors, No extra wiring. Install as fast as a replacement bulb, plug and play, can be installed in 20 mins.
These bulbs are CanBUS-Ready and will work with most vehicle's computer system without error. LONGER LIFE: Last more than 50,000 Hours.
Rainproof driver, housing, and fan works even in extreme situations. Available Single Beam Bulb size: H1 (Replace high beam or low beam or fog light).2Pcs Cree LED Headlight Bulbs English User Manual. Notice 1: All led bulbs have heat sink, please make sure there is enough space behind the headlight housing (about 45mm) for the heat sink of led headlight. Notice 2: (1)These led headlight bulbs kit only replace Factory Halogen bulbs, they won't replace Factory HID bulbs. (2)This LED bulb H1 is NOT fully plug & play for some vehicles, some modification may be needed, need connect them to factory positive and negative to get power. Will these led bulbs fit for my car?
(1)Go to "sylvania-automotive" website, find the part number of stock bulb on your vehicle. (2)Take a look in your vehicle handbook or Take out your existing bulb from your vehicle, verify the part number of the bulb, match the part number on our listing.Q2:How to install these led bulbs and get good pattern? A: Should be installed vertical, and the diodes are at 9 and 3 o'clock position.
(about 9007/H4/H13 hi-lo beam led bulbs, the high beam is at the bottom, the low beam is at the top) Each car's headlamp reflector is different , so for some vehicle, 9004/9007/H4/H13 led bulbs will need adjust the angle to get the good pattern. First let the headlight shines toward the wall, remove the screws from the bracket and install the led bulbs into the headlight housing and turn the bulb slowly to find the best pattern, then twist back the screws of LED bulb's bracket to fix. Sometimes after finding the best angle, maybe you will need to drill a new hole manually to fix. Q3:After installing, why neither side led bulbs turn on or lighting up?
Or both sides led bulbs are flickering? Or have error code on car computer? A: (1)First, Polarity Problem. Unlike halogen bulbs, LED are polarity sensitive.
Different car manufactures have different polarity setup, if led bullbs don't turn on or lighting up, Pls check for a polarity mismatch, disconnect the bulb and flip the socket in order to reverse the polarity to install. (2)Second, Compatible Problem(Voltage Problem). The vehicle's computer system is sensitive to the led headlight bulb (the power of the led headlight bulb is lower than the halogen ones).Therefore, it may be occur compatible problem (flickering, error code, radio interference, headlamp fog light interference, high beam and low beam interference, etc) , after replacing the led headlight on some vehicle, e. Audi, Mercedes, Ford, Volkswagen, Volvo, Jeep Dodge and Ram etc, then will need to add resistor/decoders to solve these compatible problems. The item "CREE H1 LED Headlight Bulbs High Low Fog Light Kit 60W 7200LM 6000K Cool White" is in sale since Saturday, May 21, 2016. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Lighting & Lamps\Light Bulbs\LED Lights". The seller is "car_light_us" and is located in Sacramento, California. This item can be shipped to United States, Canada.