13ft-32ft: 8ft power supply that will power up to 32ft of LED strips and has a cord to the plug so you can cut plug off and hardwire if needed. Lutron Dimmable driver is a dimmable driver that is most commonly used with a 110V Lutron dimmer but can be used with any 110v wall dimmer.
Simply hardwire into your 110V wiring and use with any wall dimmer. Our wireless RF dimmers do not need line of sight. Round knob dimmer is an inline dimmer with on/off.
Please follow the simple steps below to make a custom order only consisting of the parts you really need! Start with your initial item that is any length strip you may need and ADD dimmer or wireless dimmer and ADD power supply that fits the length of ALL strips you intend to order. The dimmer will also act as your ON/OFF Switch.
Now add to your cart. Now start selecting the other strips you need one at a time with no power and no dimmer and add each to your cart ONE at a time giving you a fresh page to choose another strip each time. When ordering multiple items like this we will make sure to send clip on couplings that allow you to turn and corner and adds 6 inches of thin wire between one strip and the next. To extend to any length gap just cut that wire in the middle and add some of your own.Any 18 or 20 gauge speaker wire will do the job. EG: IF YOU ORDER 3 SEPARATE STRIPS (ONE WITH POWER AND TWO WITHOUT) THEN YOU GET 2 COUPLINGS TO CONNECT THE REMAINING STRIPS TOGETHER. WE DO NOT SEND EXTRA COUPLINGS FOR CORNERS AND CUTS THAT YOU MAY MAKE. When you have gotten more than 32ft (192 inches) of LED strips then please make sure to add another power supply and dimmer with one of the strips as you have reached your limit on what my power supplies, dimmers and current transfer of the strips themselves can handle. The Professional Kitchen LED Strips from 21 LED LLC is our Newest addition to affordable flexible LED accent Lighting!
These are equipped with 3M adhesive so it is just peel and stick. 4ft weighs about 1 ounce but if your surface is not good to stick to then you may need some tap in staples or extra glue. With the 140º light output you can mount flush under your cabinets as in the PHOTOS and get perfect coverage.
The 6 X brightness is perfect (6 times brighter than the typical 3528 strips and over DOUBLE the brightness of a 5050 strip). Extremely High Lumen LEDs - "6x Brightness" - DOUBLE the brightness of SMD 5050 (about 600 Lumens per Foot) As bright as anyone could ever want for under cabinet lighting. Fully and Seamlessly Dimmable with wireless dimmer or knob dimmer available above (will stay at setting you had selected next time you turn it on).
Full Coverage LEDs w/ a 140+ Degree of Light output to cover everywhere evenly. Light Sleek Design at only.
4 inches (10mm) wide and under 1/16 (1.5mm) inches thick can tuck these anywhere! Light your entire kitchen above cabinets(enough light shining off your ceiling to light the whole room), under cabinets and even around bar area with under 100 WATTS of power and they NEVER even get warm. 50,000 Hours of light! That is over 17 years if you used them 8 hours a day!
Video will open in a new window. Input voltage: AC 85-265V 50-60Hz (Power Supply converts to 12V for bar).
Power consumption: 4W per ft-Color Temperature: 3200k Warm White. LED quantity: 18 pcs per ft.
LED sources: Epistar High Lumen LEDs. 50,000 Hour Life Span (Over 17 YEARS at 8 hours a day). 10% of this sale price is donated to help stop slavery around the world. For God so loved the world, that he gave his only Son, that whoever believes in him should not perish but have eternal life. The item "Kitchen Under Cabinet Professional Lighting Kit WARM WHITE LED Strip Tape Light" is in sale since Friday, November 29, 2013.
This item is in the category "Home & Garden\Lamps, Lighting & Ceiling Fans\Wall Fixtures". The seller is "21ledusa" and is located in Arlington, Texas. This item can be shipped worldwide.