This allows the amber turn signal to be more noticeable and vibrant to other drivers. EASY INSTALLATION With the Eagle Lights LED Turn Signals, upgrading couldnt be easier.
Our LED Turn Signals are plug and play on most Harley Davidson models. Installation typically takes about 5 minutes.
Pop off the lens, replace the old one with your new LED turn signal, put the lens back on and go for a ride. Ride safer, look better, and ride longer with the Eagle Lights LED Turn Signals.
FRONT LED TURN SIGNALS Brand new design. Our front LED turn signals have a 24 LED halo ring. The halo ring is 6000K and is a pure bright white light.
It will match all of your other LED products. The inner 24 LEDs are amber and function as the turn signal.
The halo ring will turn off when the LED turn signal is active. This allows the LED turn signal to be more noticeable to oncoming drivers. FITMENT : All Harley Davidson models with 2 Bullet style front turn signals. Older models may experience hyper flash which can be corrected by installing Eagle Lights load resistors (PN: EL60WR) Does NOT fit 3-1/4 Flat Style turn signals. Flat style turn signals can be identified by the two screws that mount the lens to the housing.
Eagle Lights manufacturers higher quality LED headlights than OEM Manufacturers. Our customer service and superior products separate us from our competition.
We strive to answer all questions within 24 hours and stand behind everything we sell. Our goal has always been to satisfy the customer, but we often exceed all expectations with our willingness to solve all problems and treat our customers the way we would hope to be treated. We are off-road and motorsport enthusiasts at heart. The more we learned about lighting the more we realized that the lights that we really wanted were not being produced.
We designed our lights and found a factory willing to make them to our specifications. We are now one of the largest aftermarket LED headlight manufacturers in the world.Warranties expire when you sell your vehicle and are non-transferable. EAGLE LIGHTS MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. EAGLE LIGHTS SHALL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. What lights do I need for my bike?
Street Glide Any of our 7 LED headlights or headlight kits will work on a Street Glide, but you will need a 8700R mounting ring. You will also need a 69200897 for 2014 and newer bikes. Road Glide We have an LED replacement for Road Glides. Sportster Our 5 3/4 headlights fit all years and models of Sportsters. Electra Glide Our 7 LED Headlights fit Electra Glides.
You will Need an 8700R adapter ring. 2014 and newer bikes will also need a 69200897 adapter wire. Dyna Our 5 3/4 LED headlights fit all Dynas except for Switchback FLD's.
These need our 7 LED headlights with an 8700R mounting ring. Softails Softails take our 7 LED headlights or headlight kits. 2012 and newer bikes need a special adapter that we do not currently have available.Do I need an adapter ring? The 8700R adapter ring is used to fit 7 LED headlights into smaller buckets. The rings are normally needed for: 12-13 Harley Davidson FLD 94-13 Harley Davidson Touring models 91-13 Softails with headlight nacelle kit. Do I need the 69200897 adapter plug? The 69200897 adapter plug is required for installation of Harley Davidson 7 LED headlamp on specific models such as 2014+ Harley Davidson Touring and Trike models. 2014 and up Street Glide FLHX. 2014 and up Electra Glide FLHT. 2014 and up Ultra Limited FLHTK. 2014 and up Road King may require splicing. I have a softail and the light does not sit tightly in the bucket. Softails may require Harley Part # 6770059 Vibration Damper for a secure fit. Please see Harleys site for an exact listing.
I lost my installation instructions, where can I find them online? We have instructions, diagrams and more available. Will 5 3/4 Generation 3 Headlights fit my V-Rod?Our 5 3/4 Generation III LED Headlights fit 2006 - 2011 V-Rods. 2012 and up V-Rods VRSC will need a special adapter that we do not have. Where are your lights made?
All of our lights are designed in the US and manufactured to our specifications in our factory in main land China. Will this fit on 02 Fatboy with no extra bracket?
Yes, our 7 lights fit most Fatboy's without an additional adapter ring. Will the 8700B fit a 2016 flhxse? Yes, but you will need 69200897 2014 to current adapter wire and a 8700R adapter ring.Will the 8700BG2 fit on my 2016 fatboy s? Yes, but it will need a 69200897 adapter wire.. Do I need an adapter ring for my Harley? All Harley touring models may need the adapter. This includes Street Glides, Road Kings and Electra Glides. Some touring models will however come with larger rings already installed. In this case please use the stock ring if it fits and simply return our ring. This listing is currently undergoing maintenance, we apologise for any inconvenience caused.
The item "Eagle Lights Harley Front 2 LED Turn Signals Inserts White/Amber 1157 HD Bullet" is in sale since Wednesday, May 17, 2017. This item is in the category "eBay Motors\Parts & Accessories\Motorcycle Parts\Lighting & Indicators\Other Lighting Parts". The seller is "eaglelights" and is located in Norwalk, Connecticut.
This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Switzerland, Norway, Ukraine, Croatia, Brazil, Chile, Colombia, Bolivia, Ecuador, Gibraltar, Iceland, Sri lanka, Luxembourg, Maldives, Peru, Paraguay, Uruguay.