The latest technology to ensure a perfect beam pattern without any dark spots. QUICK HEAT DISSIPATION: Whole aluminum housing 7,000 RPM Powerful TurboCool fan to achieve Fast and Efficient Cooling, ensures your LED Headlight bulbs work long time. EASY INSTALLATION: No relay, No capacitors, No extra wiring.
Install as fast as a replacement bulb, plug and play, can be installed in 20 mins. These bulbs are CanBUS-Ready and will work with most vehicle's computer system without error. LONGER LIFE: Last more than 50,000 Hours. Rainproof driver, housing, and fan works even in extreme situations. Model : 9005 / HB3 + H11 / H8 / H9 (Single High Beam + Low Beam/Fog Light).Actual Lumen : Up to 7200 lms/Set & 3600 Lms/bulb. LED Type :Cree MK-R LED. Color Temp: 6000K Cool White. Working Temp : -40'C - +80'C. Connector Type :Plug and Play. Life Span:Up to 50,000 Hours. 2x9005 + 2xH11 LED Headlight Bulbs +. This led headlight kit only replace Factory Halogen bulbs, it will not replace Factory HID bulbs. "Compatibility" may not be 100% accurate or up to date. Then we will help you match correct bulbs.
But On new cars manufactured after 2002 adopting the Can-Bus wiring system may show signs of problems i. E warning error on the dash board: "Bulbs Failure", flickering. If you get this problem, please contact with us for decoders or load resistors. Led headlight kit installations start with preparation. You have to make sure the vehicle is off the battery is disconnected, and the engine is cooled down.This is will ensure your safety. Now we can move to the actual installation. If you have a single low beam kit, locate your low beam dust cover on the back of your headlight assembly. Remove the cover by twisting it counter clock wise.
This should unscrew the dust cover giving you access to the bulb. Make sure you unplug the bulb from the wiring harness before you attempt to remove it. Now you can continue to place the LED bulb in place of the halogen bulb you just removed, just make sure you don't touch the glass part of the bulb. Customers can contact with us for installation detail for any bulbs size like 9007/9004 80W installation with more complicated steps. First thing is to find a good location to place the ballast, somewhere close enough to able to reach the bulb with the wiring plugs.
Once you have the ballast secured then you can proceed to plug the wiring to the bulb, and plug the old harness to the ballast. In Led headlight kit installation is to double check all the wiring plugs to make sure everything snapped into place correctly. Also double check to make sure that the ballast/driver is securely attached to the vehicle. Now you can reconnect your battery and test out your new LED upgrade.We are not responsible for incorrect or undeliverable addresses. For both domestic and international. At the bottom of the pag.
We really appreciate your support! The item "9005+H11 CREE LED Headlight Conversion Kit Light Bulbs 120W 14400LM 6000K White" is in sale since Monday, November 21, 2016. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Lighting & Lamps\Headlights".
The seller is "car_light_us" and is located in Sacramento, California. This item can be shipped to United States, Canada.